Make Up Application (Update 1)
Mineral Powder Foundation Instructions Cleanse face and moisturize. Allow the moisturizer to absorb-skin should be completely dry for proper mineral application. To begin, remove the seal from the sifter, leaving the sifter itself intact. Tap a small amount of mineral powder into either the cap or into a small shallow dish. Then, lightly dip the powder brush into the minerals, and use the lid or dish to swirl the powder into the brush evenly. Lightly tap off any extra powder collected. Apply the mineral powder in thin layers using DOWNWARD strokes. It is easy to over-do at first, as the powders are very concentrated. If you applied too much, use a sponge to remove excess. If you need additional coverage on specific areas, a smaller concealer brush is recommended. Follow the same process above, but only apply the powder to specific areas, such as directly on blemishes. It is recommended that you use the tools which were designed for these powders. This is not to sell product-the results